Oilfield Fishing Tools Bowen Equivalent 150 Overshot for Drill Collar and Pipe

• Customization: Available
• After-sales Service: 1 Year
• Warranty: 1 Year
• Model NO.: 150
• Manufacturing Process: Forging
• Surface Treatment: Polishing
• Operation Pressure: Atmospheric Pressure
• Material: Cast Steel
• Standard: ISO9001:2008, ISO14001:2004 Certification
• Connection: Nc 26 31 38 50, 6 5/8 Reg
• Od: 89-340mm
• Spiral Grapple Catch Size: 60.3-286mm
• Transport Package: Wooden Case
• Specification: see the detail specification
• Trademark: TIANHE
• Origin: China
• HS Code: 8208101900
• Production Capacity: 50000piece/Year

Product Description

Product Description

TIANHE Series 150 Releasing and Circulating Overshot can be equipped with a wide range of accessories  to meet a variety

of complex fishing environmental.

Extension Sub
An extension sub is assembled between the top sub and the bowl. It is used when the upper portion of the fish is damaged or cannot be engaged. This accessory will permit the overshot to be lowered far enough over the fish to ensure secure engagement and pack off. They are available in lengths from 24 to 60 inches. When ordering, specify overshot O.D. Unless otherwise specified Extension Subs will be furnished in a standard 36-inch length.

Wall Hook Guide
If the fish is positioned in a washed out section of the hole, it  may be difficult to engage the top of the fish using a conventional overshot guide. A wall hook guide can be used to capture the neck of the fish, centralize it, and then properly guide the fish into the bowl

Oversize Guide
Oversized Guide properly guides the fish into the overshot when the hole size is considerably larger than the diameter of the fish  and the overshot may pass alongside the fish without engaging it. Installation of an oversized guide instead of a standard guide will ensure alignment of the fish with the overshot.

Mill Extension
Overshot Mill Extension interiors are faced with lncoloy to a size that will mill away a flared or jagged fish to enable it to pass up into and be engaged by the Grapple in the Bowl. Mill Extensions are installed between the Bowl and the standard, oversize or wall hook guides.


Mill Guide
Overshot Mill Guides are designed to remove badly flared or jagged metal from the top of the fish. Mill Guides are used in place of the Standard or Oversized Guide to trim the fish so it can enter the overshot
 

Model	Product Code	O.D (mm)	Max.Catch Size(mm)		API Connection	Model	Product Code	O.D. (mm)	Max.Catch Size(mm)		API Connection
			Spiral Grapple	Basket Grapple					Spiral Grapple	Basket Grapple
LT-T89	L01-1100	89	60.3	47.6	NC26	LT-T194	L01-2400	194	159	141	NC50
LT-T92	L01-1200	92	73	63.5	NC26	LT-T200	L01-2500	200	159	141	NC50
LT-T95	L01-5100	95	76.2	66.6	NC26	LT-T206	L01-2600	206	178	163	NC50
LT-T102	L01-1300	102	73	60.3	NC26	LT-T206A	L01-2700	206	168	152	NC50
LT-T105	L01-1400	105	85.7	73	NC31	LT-T219	L01-2900	219	178	159	NC50
LT-T114	L01-1500	114	89	75	NC31	LT-T232	L01-3000	232	203	187	NC50
LT-T117	L01-3800	117	89	78	NC31	LT-T244	L01-3100	244	203	184	6 5/8 REG
LT-T127	L01-1600	127	95	80	NC38	LT-T260	L01-3200	260	219	200	6 5/8 REG
LT-T143	L01-1700	143	120.6	108	NC38	LT-T270	L01-3300	270	228.6	209.6	6 5/8 REG
LT-T152	L01-2000	152	128	114	NC38	LT-T273	L01-3400	273	241.3	216	6 5/8 REG
LT-T168	L01-2100	168	127	114	NC50	LT-T286	L01-3500	286	244.5	225.4	6 5/8 REG
LT-T168B	L01-2200	168	139.7	120.6	NC50	LT-T298A	L01-3600	298	257	238.1	6 5/8 REG
LT-T181	L01-2300	181	146	127	NC50	LT-T340	L01-3700	340	286	263	6 5/8 REG

 

Certifications

Company Profile

Tianhe Oil Group Huifeng Petroleum Equipment Co., Ltd is a modernized medium-scale enterprise specialized in production of oil and gas tools.

As an API-Certified established manufacturer and supplier of a comprehensive range of downhole equipment with related accessories, we are committed to providing the highest Quality products for the Petroleum and natural gas industry since 1973.


Tianhe Oil Group strongly believes and promotes Total Quality Management, implement the ISO quality management system and HSE management system and API Standard, which has been deeply implanted into every person's thought and carried out into every aspect of work.

Our manufacturing facilities are well equipped with four automated induction heat treatment lines and dozens of other types of heat treatment ovens and well furnaces to ensure full coverage of heat treatment requirements by different products to achieve the required mechanical properties.

In order to ensure the quality consistency and interchangeability of high precision components, Tianhe has introduced WFL 5-axis Linkage Turning & Milling Machining Center from Austria, Mazak's turn milling machining center from Japan and the Haas vertical machining center from USA. These processes are facilitated with precise quality inspection equipment such as the Brunker OES Metal Analyzers from Germany, Ultrasonic and Magnetic Powder Flaw Detector and high precision Hexagon Three Coordinate Measuring Machine and Farco Portable Three Coordinate Measuring Machine.

So far, Tianhe Oil Group has established strong business relationships with over 200 international oil & gas companies in supporting the top 50 oil producing countries.

We take pride in delivering superior performances and reliability. Our objective is to exceed your expectations, improve your economics and be an integral part of your strategies.